Headux TitanMig Pulse 2700 Operation Manual Download Page 35 | Manualshive

Page: 35 / 72

Headux TitanMig Pulse 2700 Operation Manual Download Page 35

TitanMig Pulse 270/3500/5000 Operators Manual

Issue. A 0516

31

3.1

GMAW (MIG) Welding

Use welding process button to select

Synergic Mig or

Single Pulse Mig or

Double Pulse Mig welding method. then adjust the other parameters.

Current, wire feed speed and thickness:

these three parameters are linked, if you adjust one of them,

the others will be matched automatically due to there is a Highly intelligent expert database in welding
machine.The user just need to select the welding process, operation mode, type of material, wire
diameter and any one of (current, wire speed, thickness), the machine will find the best combinated
parameters from the expert database.
  Arc length: the standard arc length in the expert database is (=0), the user could increase or decrease the
arc length according to the welding technology.

Inductance/arc force:

the standard inductance in the expert database is 0, the user could increase or

decrease the inductance/arc force. And the inductance perform different functions in different welding
methods. MIG/MAG: 0: soft arc, small splash Pulse MIG: 0:increase the droplet transfer force

Type of material:

the user could select the suitable type of material according to the base metal dand

welding wire, details in section 4.10 (expert database of MIG, PULSE MIG, & DOUBLE PULSE MIG).

Wire diameter:

setting the diameter directly according to the actual used welding wire.

Operation mode:

there are 5 kinds of torch operation mode as following diagram:

2T

«
...
33
34
35
36
37
...
»

Summary of Contents for TitanMig Pulse 2700









































































Reviews:

No comments