Headux TitanMig Pulse 2700 Operation Manual Download | Manualshive

Page: 27 / 72

background image

TitanMig Pulse 270/3500/5000 Operators Manual

Issue. A 0516

23

2.0

Installation

Worker and working area protection

Fumes and gases produced by welding are dangerous for your health. Ventilation in workplace must be
adequate to remove all harmful fumes and gases but not too strong since it could remove the shielding
gas flowing over work piece. Arc welding rays are dangerous for your eyes. The welder must always use a
welding helmet with a minimum protective shade glass No. 10 for MIG Welding. All personal protective
including working clothes, leather apron, gloves, etc. must always be worn when welding or handling the
work piece.

Unpacking

Check the packaging for any signs of damage. Carefully remove the machine and retain the packaging until
the installation is complete.

Positioning of the machine

Place the machine on a firm, dry and level surface. Where possible, do not allow dust or other impurities
to enter the machines cooling air flow. Preferably site the machine above floor level; for example on a
suitable carriage unit.
Notes for positioning the machine

•

The surface inclination should not exceed 15 degrees.

•

Ensure the free circulation of the cooling air. There must be at least 20 cm of free space in front of
and behind the machine for cooling air to circulate.

•

Protect the machine against heavy rain and direct sunshine.

NOTE!

The machine should not be operated in the rain as the protection class of the machine, IP21S,

allows for outside preserving and storage only.

NOTE!

Never aim metallic grinding spray/sparks towards the equipment.

Input connection

Before connecting the machine you should ensure that the correct supply is available. Details of the
machine requirements can be found on the data plate of the machine or in the technical parameters
shown in the manual.
The equipment should be connected by a suitably qualiﬁed competent person. Always ensure the
equipment has a proper grounding.
Never connect the machine to the mains supply with the panels removed.

«
...
25
26
27
28
29
...
»

Summary of Contents for TitanMig Pulse 2700









































































Reviews:

No comments

Related manuals for TitanMig Pulse 2700

Brand: Ecco Pages: 2

ZEB Juke Bar 1500

Brand: Zebronics Pages: 5

Brand: Panasonic Pages: 20

Brand: Livarno Living Pages: 20

Brand: Watts Pages: 73

Brand: GEZE Pages: 16

Brand: Ravaglioli Pages: 102

Brand: Advent Pages: 32

Aristo RoboFeed 30-4

Brand: ESAB Pages: 34

Brand: S7 Pages: 7

Brand: Globalmediapro Pages: 11

Brand: Microlab Pages: 4

Brand: FAAC Pages: 41

Brand: SAL Pages: 20

Brand: Liko Pages: 37

Brand: ALFIN Pages: 16

Brand: Stel Pages: 74

Brand: QOLSYS Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands