HBX THM-0200, Installation Manual

Page: 8 / 20

© 2014 HBX Controls 6
ADJUSTMENTS
1) WEEKDAY
2) WEEKEND
3) HOLD TEMP 76°F
4) MODE ROOM
5) DIFF OUTDOOR
6) SENSOR1 NONE
Hold Temperature
Allows the user to set a constant temperature
which acts to override a setback temperature. This
option must be manually turned off for the system to
reinstate pre-set setback periods.
Not applicable to 2 Heat/Cool, 2 Cool/Heat, Heat/Cool and Boiler
modes.
MODE OPTIONS
This option allows you to select between Room, Floor and Dual
r
oom
m
oDe
o
Ption
1) WEEKDAY
2) WEEKEND
3) HOLD TEMP 76°F
4) MODE ROOM
5) SENSOR1 NONE
6) SENSOR2 NONE
ADJUSTMENTS
Room Mode
Sensor temperature providing feedback for the
specific room or zone being controlled by the
thermostat.
Room Mode: Sensor 1
Room - disregards internal sensor, uses external 1.
RM/Ave – averages external 1 and internal sensor.
Floor – displays the floor temperature using external
1 sensor.
1) WEEKDAY
2) WEEKEND
3) HOLD TEMP 76°F
4) MODE ROOM
5) SENSOR1 NONE
6) SENSOR2 NONE
ADJUSTMENTS
Room Mode: Sensor 2
RM/Ave
- Averages external 1 + external 2 + internal.
FL/Ave - Averages external 1 + 2 using floor temperature.
Outdoor - Will use external 2 sensor to display
outdoor temperature.
1) WEEKDAY
2) WEEKEND
3) HOLD TEMP 76°F
4) MODE ROOM
5) SENSOR1 NONE
6) SENSOR2 NONE
ADJUSTMENTS
Room Mode: Continuous Fan
ON: Enables the fan to run continuously, regardless of
whether the thermostat is calling for heat or cooling
Int Fan ON/OFF: This setting will set the ON/OFF Time
for the intermittent fan
Ex: The fan will come on for 15min every 2h. Set (Int
Fan ON: 15min) & (Int Fan OFF: 2h)
This option is not applicable to 2 Heat/
Cool, 2 Cool/Heat, or Boiler Modes.
5) SENSOR 1 ROOM
6) SENSOR 2
ROOM
7) CONT FAN INT
8) INT FAN OFF 2H
9) INT FAN ON 15M
10) TIME 10:20
ADJUSTMENTS