HBX THM-0200, Installation Manual

Page: 9 / 20

7
f
loor
m
oDe
o
Ption
1) WEEKDAY
2) WEEKEND
3) HOLD TEMP OFF
4) MODE FLOOR
5) DIFF 6°F
6) SENSOR1 FLOOR
ADJUSTMENTS
Floor Mode
Sensor temperature providing feedback from the
floor surface to the thermostat. This mode will run the
thermostat on floor temperature only.
Only available when heating modes are the
primary function.
Floor Mode: Differential
When in floor mode, the differential option is set to
allow a differential around the target to lesson the
chances of short cycling.
1) WEEKDAY
2) WEEKEND
3) HOLD TEMP OFF
4) MODE FLOOR
5) DIFF 6°F
6) SENSOR1 FLOOR
ADJUSTMENTS
Floor Mode: Sensor 1
This option will be automatically set to floor sensor.
1) WEEKDAY
2) WEEKEND
3) HOLD TEMP OFF
4) MODE FLOOR
5) DIFF 6°F
6) SENSOR1 FLOOR
ADJUSTMENTS
Floor Mode: Sensor 2
FL/Ave
- Averages external 1 + 2 sensors using floor
temperature.
Outdoor - will use external 2 sensor to display outdoor
temperature.
2) WEEKEND
3) HOLD TEMP
OFF
4) MODE FLOOR
5) DIFF 6°F
6) SENSOR1 FLOOR
7) SENSOR2 OUTDOOR
ADJUSTMENTS
Room Mode: Continuous Fan
ON: Enables the fan to run continuously, regardless of
whether the thermostat is calling for heat or cooling
Int Fan ON/OFF: This setting will set the ON/OFF Time
for the intermittent fan
Ex: The fan will come on for 15min every 2h. Set (Int
Fan ON: 15min) & (Int Fan OFF: 2h)
This option is not applicable to 2 Heat/
Cool, 2 Cool/Heat, or Boiler Modes.
5) SENSOR 1 ROOM
6) SENSOR 2
ROOM
7) CONT FAN INT
8) INT FAN OFF 2H
9) INT FAN ON 15M
10) TIME 10:20
ADJUSTMENTS
D
ual
m
oDe
o
Ptions
1) WEEKDAY
2) WEEKEND
3) HOLD TEMP OFF
4) MODE DUAL
5) FLOOR MAX 78°F
6) FLOOR MIN 69°F
ADJUSTMENTS
Dual Mode
Sensor temperature providing feedback for both
the air temperature and floor sensor temperatures.
Only available when heating modes are the
primary function.