HBX THM-0200, Installation Manual

Page: 4 / 20

© 2014 HBX Controls 2
PROGRAMMING THM-0200
n
avigating the
t
hermostat
All programming steps within the thermostat
are achieved by using the three buttons (and
combinations thereof) located on the right-hand
side of the thermostat.
The + button is used to scroll up in menu screens and increase a
value within specific options.
The - button is used to scroll down in menu screens and decrease
a value within specific options.
Pressing the + or - button on their own for 2 seconds
while viewing the main “Status Screen” will allow you
to quickly adjust your target temperature. Once you
have reached the desired target temperature by
using the + and - buttons, waiting five seconds will
return the thermostat to the initial “Status Screen”
mode.
s
etting the
t
hermostat
Special Functions
Enter the “Special Functions” screen by holding down the + and - buttons
simultaneously for 5 seconds (from the “Status Screen” ). To select the desired
option, use the + and - buttons to toggle and the set button to select.
1) Type - Select between Heating, Cooling, Boiler, and a variety of combined modes.
Heat Only Function
Select the “Heat Only Function” for applications
using a single heating source.
See diagram 1 or 2 for wiring examples.
1) TYPE HEAT ONLY
2) C OR F
°F
3) VIEW ALL YES
4) VIEW AUTO YES
5) SETBACK YES
6) ROOM OFFSET 0
°
F
SPECIAL FUNCTIONS
Cool Only Function
Select the “Cool Only Function” for applications
using a single cooling source.
See diagram 3 for wiring example.
1) TYPE COOL ONLY
2) C OR F
°F
3) VIEW ALL YES
4) VIEW AUTO YES
5) SETBACK YES
6) ROOM OFFSET 0
°
F
SPECIAL FUNCTIONS
Heat/Cool Function
Select the “Heat/Cool Function” for applications
using a single heating source and a single cooling
source.
See diagram 4 for wiring example.
1) TYPE HEAT/COOL
2) C OR F
°F
3) VIEW ALL YES
4) VIEW AUTO YES
5) SETBACK YES
6) ROOM OFFSET 0
°
F
SPECIAL FUNCTIONS
72.0
°F
10:00 am
MON
SET TARGET
FLOOR
79°F
TARGET
72°F
HEAT