HBM T40FH, Mounting Instructions

Page: 45 / 140

TEDS transducer identification
T40FH
A4429-3.0 HBM: public
43
Template: Bridge Sensor
Explanation Required
user
rights Unit Value
1)
Parameter
Calibration Period
(Days) 730 days CAL Time before recalibra­
tion, calculated from the
date specified under Cal­
ibration Date.
Measurement
location ID 0 USR Identification number for
the measuring point.
Can be assigned accord­
ing to the application.
Possible values: a num­
ber from 0 to 2047. If this
is not enough, the HBM
Channel Comment tem­
plate can also be used
for this purpose.
1)
Typical values for an HBM T40FH/150 kN
@
m torque flange
Template: HBM Channel Name
Channel name T40FH/150 kNm
When creating the Bridge Sensor template, the manufacturer defines the physi­
cal measured quantity and the physical unit.
The available unit for the particular measured quantity is specified in the IEEE
Standard. For the measured quantity of torque, the unit is "N
@
m".
At the time of creating the template it is also necessary to choose between the
options "Full Precision", "mV/V" and "uV/V" for the accuracy of the characteris­
tic transducer curve mapped in TEDS.
The factory setting is "Full Precision", in order to be able to use full digital reso­
lution. This choice is also recommended to users who program the TEDS mem­
ory themselves.