Mechanical installation
22
A4429-3.0
HBM: public
T40FH
Fig. 5.4
Fastening for horizontal installation
CAUTION
You must remove the eyebolts after mounting! Keep them safe for later use.
5.6
Mounting the rotor
Tip
Usually the rotor type plate is no longer visible after installation. This is why we
include with the rotor additional stickers with the important characteristics,
which you can attach to the stator or any other relevant test-bench compo
nents. You can then refer to them whenever there is anything you wish to
know, such as the shunt signal. To explicitly assign the data, the identification
number and the size are engraved on the rotor flange, where they can be seen
from outside.
