HBM T40FH, Mounting Instructions

Page: 43 / 140

TEDS transducer identification
T40FH
A4429-3.0 HBM: public
41
Additional templates, such as the Signal Conditioning template, can also be
described by the user.
Template: Bridge Sensor
Parameter Value
1)
Unit Required
user
rights Explanation
Transducer Elec­
trical Signal Type Bridge
Sensor
ID
Minimum Torque 0.000 N
@
m CAL The physical measurand
and unit are defined
when the template is cre­
ated, after which they
cannot be changed.
Maximum Torque 150000 N
@
m CAL
Minimum Electri­
cal
Value
0.0000m V/V CAL The difference between
these values is the sensi­
tivity according to the
HBM manufacturing cer­
tificate or from the cali­
bration.
Maximum Electri­
cal Value 1.8245m V/V CAL
Mapping Method Linear This entry cannot be
changed
Bridge type Full ID The bridge type. "Full" for
a full bridge.
Impedance of
each bridge ele­
ment 1550+-100 ohm ID Input resistance accord­
ing to the HBM data
sheet
Response time 1.0000000u s ID Of no significance to
HBM transducers
Excitation Level
(Nominal)
5.0 V ID Nominal (rated) excita­
tion voltage according to
the HBM data sheet