HBM ML77B, Operating Manual

Page: 58 / 60

Setup parameters in the AB22A Setup mode
58
A00760_09_E00_00 HBM: public
ML77B
12 Setup parameters in the AB22A Setup mode
All parameters are set up or read out via the PAR or PAR? command (see “Op­
eration with computer or terminal”).
12.1 Parameter list
No. Type Range of
values Comment
1 NODE 0..1 ML77B mother node
2 NODE 0..1 DP setup menu
11 NODE 0..1 Output data menu
12 NODE 0..1 Input data menu
13 NODE 0..1 Diagnostic data menu
14 NODE 0..1 Configuration data menu
15 NODE 0..1 Parameterisation menu
16 NODE 0..1 Bus parameters menu
21 EDIT 3..123 DP address
22 TEXT “Behaviour with system errors”
23 MENUE 1730,
1731
1730 = No data exchange
1731 = Data exchange with diagnosis
111 EDIT 0..220 Output-data start address
112 TEXT 8-byte output data
113 TEXT Subsequent 8-byte output data
114 TEXT Subsequent 8-byte output data
121 EDIT 0..220 Start address for input data
122 TEXT 8-byte input data
123 TEXT Subsequent 8-byte input data
124 TEXT Subsequent 8-byte input data
131 TEXT Byte 1..8 of diagnostic data
132 TEXT Byte 9..12 of diagnostic data
133 KEY Update diagnostic data
141 EDIT 0..220 Start address for configuration data
142 TEXT 8-byte configuration data