manualshive.com logo in svg

HBM CX27B, Operating Manual

Share
Download
HBM CX27B Operating Manual Download Page 73

Connecting individual QuantumX modules

Quantum

X

I3031-14.0

  

HBM: public

73

7.2.5

Firmware update via Ethernet

We recommend that the firmware and software used to
operate QuantumX are always kept up to date.

S

Download the latest firmware from the HBM website.
If you do not work with catman

®

, please download the

QuantumX software package from the HBM website.

Please save the firmware under ...\HBM\cat­
manEasy\Firmware\QuantumX­B, or on C:\Temp.

S

Start catman

®

, scan the network for modules and

carry out the recommended firmware update. catman
comes with the firmware included. This is usually
stored under: 
C:\Program Files\HBM\catman\Firmware\Quan­
tumX­B

If you do not work with catman

®

, please install the

free MX Assistant, connect to the modules, and use it
to perform the update. If the modules have a firmware
version < 2.21, you should install the QuantumX Firm­
ware Updater tool, and use it to bring all the modules
up to date. From firmware version > 4.0, a firmware
update can also be performed with the MX Assistant,
or with catman.

Summary of Contents for CX27B

































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands