Hazer
²
– the cube
6.1 Control panel of the hazer
²
The Hazer
²
is operated via the four push buttons (menu, minus, plus, confirmation)
and the OLED display. The menu fields are located in the corners of the display, and
the value field in the center, which displays the value of the selected menu field. The
menu key is used to select the individual menus counterclockwise. With the help of
the plus and minus keys, the corresponding value can then be changed and then
saved with the confirmation key.
On the left and right side of the screen, the white bars indicates whether the heater is
activated. In the switch-off process, these bars become smaller and smaller until
finally the heater and the air pump are deactivated. This evaporates any fluid drops
still in the heating element.
6.2 Operation in the stand-alone mode
The simplest case of control is the stand-alone mode. For this, the pump value is set
to the desired value and the confirmation key is pressed. The heating element is
heated up and the haze process starts after a few seconds as soon as the correct
temperature is reached.
The pump value can also be changed during the haze process.
Pressing the confirmation key again stops the haze process again.
The same applies to the setting of the fan value.
8
Menue
button
Minus button
Plus button
Enter button
menue field
Value field
Heater on
