Hazer
²
– the cube
6.3 Operation via DMX512/RDM
When operating via DMX512, the
XLR input must first be set to DMX
(see chapter Options).
As shown, "DMX" appears in the
upper right menu field. The DMX
address can be changed with the
plus and minus keys and must be
stored afterwards with the
confirmation key.
If a valid DMX signal is present, this is indicated at the top center with "active". The
currently read pump value can be displayed by selecting the pump menu item. If the
received value is greater than zero, the Hazer² starts the haze process and stops it
accordingly at the value zero.
The Hazer² has two DMX channels. Channel 1 is assigned to the pump, channel 2 sets
the fan speed.
Via RDM the Hazer² is configurable (DMX address) as well as readable (error or
temperature data). Furthermore, a firmware update can be done via this RDM input.
9
DMX signal
DMX mode