Hazer
²
– the cube
8. Care and maintenance
•
Avoid running the Hazer
²
without fluid. The pump will otherwise run dry.
•
Avoid overheating the device due to direct sunlight or direct spotlight. The
permissible ambient temperature can be found in the technical data.
•
Make sure that the ventilation slots of the machine are not clogged with
dust deposits. If necessary, the ventilation slots must be cleaned.
•
Wipe up leaked fluid immediately.
•
Check the suction strainer in the tank from time to time. Clean it or replace
it.
•
If you use the same fluid bottle frequently, you should rinse it thoroughly
before each filling with fresh fluid. This will prevent contamination.
•
If necessary, clean the surface of the device with a suitable, solvent-free
cleaning agent
•
Make sure that sufficient mist-free cooling air permanently surrounds the
machine. Otherwise, moisture damage could occur inside the machine.
•
after a few hours of operation, condensate droplets may have formed in the
condensate droplets may have formed in the discharge area. This does not
represent an operating fault. Please clean the area only when the machine
has cooled down.
•
PLEASE NOTE:
The vaporizer of our fog machines does NOT need to be
cleaned! Cleaning fluids offered on the market can damage the vaporizer!
The warranty will be void in this case.
13
