Hazer
²
– the cube
Up to 60 different radio remote transmitters can be programmed on the machine. For
this purpose, the "Remote" submenu must first be selected.
In the Remote submenu, the
menu fields are replaced. At
the top left, the channel (key
on the hand-held transmitter)
can be selected. At the bottom
left, a new radio remote
transmitter is taught-in and at
the bottom right, the taught-in
hand-held transmitters are
deleted again.
A new hand-held transmitter is taught as follows. First select the menu item add and
confirm this with the confirmation key. „Adding" now appears at the bottom left. The
machine now waits for a valid radio signal. To do this, press any key on the handheld
transmitter. The teach-in process is now complete and "add" appears again at the
bottom left. You can then select the key and save it.
To delete the already taught-in handheld transmitters, select the menu item "del" and
confirm it. At the bottom right, "deleting" now appears. The deleting process is now in
progress. The display changes back to "del" after a successful deleting process.
To exit the submenu, the menu item "exit" must be selected and confirmed with the
confirmation key.
11
