Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
K487BLU REV A
18
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
6. Access Cover Assembly:
The purpose of the access cover assembly is to allow quick access to the turbine/vacuum chamber for easy cleaning and
maintenance.
Should the Hayward Blu cleaner stop moving or become sluggish due to debris trapped in the throat or inside the unit, the
turbine/vacuum chamber is accessible following the following instructions:.
1. Turn off pump.
2. Remove Hayward Blu cleaner from pool.
3. Disconnect Hayward Blu cleaner from leader hose.
4. Turn Hayward Blu cleaner upside down.
5. Locate and loosen the captive screw behind the throat in the center of the bottom (See Figures 14 and 15).
6. Remove access cover assembly (See Figure 14 and 15).
7. Clean turbine/vacuum chamber of any debris with fingers (See Figure 16).
8. Check turbine for free movement (rotation).
9. Reinstall access cover assembly by lining up the cover screen with the two slots shown in Figures 14 and 15. Then
…
slide the cover in place and tighten the captive screw.
10. Reinstall Hayward Blu cleaner in pool per installation instructions and/or installation video.
K487BLU REV A
18
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
6. Access Cover Assembly:
The purpose of the access cover assembly is to allow quick access to the turbine/vacuum chamber for easy cleaning and
maintenance.
Should the Hayward Blu cleaner stop moving or become sluggish due to debris trapped in the throat or inside the unit, the
turbine/vacuum chamber is accessible following the following instructions:.
1. Turn off pump.
2. Remove Hayward Blu cleaner from pool.
3. Disconnect Hayward Blu cleaner from leader hose.
4. Turn Hayward Blu cleaner upside down.
5. Locate and loosen the captive screw behind the throat in the center of the bottom (See Figures 14 and 15).
6. Remove access cover assembly (See Figure 14 and 15).
7. Clean turbine/vacuum chamber of any debris with fingers (See Figure 16).
8. Check turbine for free movement (rotation).
9. Reinstall access cover assembly by lining up the cover screen with the two slots shown in Figures 14 and 15. Then
…
slide the cover in place and tighten the captive screw.
10. Reinstall Hayward Blu cleaner in pool per installation instructions and/or installation video.
220318_BluManual_r3.indd 18
1/14/13 1:27 PM