Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
K487BLU REV A
14
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
1. Check the condition of the
“shoes, wings and flaps”
periodically.
The shoes and wings have wear indicators on
their sides and should be checked occasionally to determine if they need to be replaced. The shoe wear indicator is the
line on the side of the shoe that appears as a difference in texture. If the texture difference is no longer visible at the
bottom of the shoe when viewed from either side, the shoes must be changed (See Figure 8). Also on the side, the
wing wear indicator is the horizontal line which has three (3) vertical lines above it. If you can no longer see the
horizontal line, the wings must be changed (See Figure 9). The Hayward (AXV414604WHP) shoe and wing
maintenance kit is available from your Hayward dealer. Shoes, wings and flaps may also be purchased separately.
2. SHOE REPLACEMENT:
a) Turn unit upside down.
b) Insert a small flat screwdriver between white plastic foot and the shoe on one of the pods (See Figure 8).
c) Using a lifting motion, remove the shoe from the plastic foot.
d) For ease of installation installation, dip the new shoe in water and press it on to the plastic foot making sure that the
small post matches up with small hole and the large post matches up with the large hole. The posts and holes are
different sizes in order to prevent the shoes from being improperly installed.
e) Repeat Steps b, c and d for each shoe.
K487BLU REV A
14
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
1. Check the condition of the
“shoes, wings and flaps”
periodically.
The shoes and wings have wear indicators on
their sides and should be checked occasionally to determine if they need to be replaced. The shoe wear indicator is the
line on the side of the shoe that appears as a difference in texture. If the texture difference is no longer visible at the
bottom of the shoe when viewed from either side, the shoes must be changed (See Figure 8). Also on the side, the
wing wear indicator is the horizontal line which has three (3) vertical lines above it. If you can no longer see the
horizontal line, the wings must be changed (See Figure 9). The Hayward (AXV414604WHP) shoe and wing
maintenance kit is available from your Hayward dealer. Shoes, wings and flaps may also be purchased separately.
2. SHOE REPLACEMENT:
a) Turn unit upside down.
b) Insert a small flat screwdriver between white plastic foot and the shoe on one of the pods (See Figure 8).
c) Using a lifting motion, remove the shoe from the plastic foot.
d) For ease of installation installation, dip the new shoe in water and press it on to the plastic foot making sure that the
small post matches up with small hole and the large post matches up with the large hole. The posts and holes are
different sizes in order to prevent the shoes from being improperly installed.
e) Repeat Steps b, c and d for each shoe.
220318_BluManual_r3.indd 14
1/14/13 1:27 PM
