28
•
Make sure the unlock pin
engages automatically and
the
joint is secured.
9. Hedge trimming
•
Prepare the product to required length attaching the pole
extensions and/or the hedge trimmer shaft.
•
Cut and remove branches exceeding the cutting capacity of
this product using a proper pruner before operation.
•
Always hold the product firmly with both hands on gripping
surface and handle grip. Never operate this product
using
only one hand.
•
Cut both sides from the bottom cutting upwards to the top.
This will prevent any of the cuttings falling into the path of the
area still to be cut.
•
After cutting the sides proceed to the top.
•
When cutting wide hedges with the cutting area in sight
move the cutting blade lightly through the cutting surface in a
sweeping motion following the shape of the hedge or shrub.
•
A slight tilt downwards of the cutting blade in the direction
of motion is recommended for optimum cutting performance.
•
Move the product with slow motion forward when cutting
higher hedge and the cutting area out of sight
•
Do not to rush and do not attempt to cut too much with one
stroke of the cutting blade.
NOTE: Try to keep the cutting blade angled at
approximately 15° to the cutting surface.
