37
8)
Refit the saw chain and the guide bar as
described
under “Assembly”.
h.
Air filter
1)
Inspect the air filter regularly. Replace it with a new one if
necessary.
2)
Open the air filter case with the cross-head screwdriver,
and remove the filter.
3)
Tap the filter on a stable surface to remove dust. Use
compressed air (max. 3 bar) to remove stubborn dust.
4)
Apply a small amount of air filter oil on the filter to increase
the performance of the filter.
5)
Wring out surplus oil and put the filter into the case.
6)
Close the air filter cover.
i. Fuel tank
1)
Empty the fuel tank when storing the product over 30 days
to prevent the fuel from deteriorating.
2)
Unscrew and remove the fuel tank cap and use a
proper
fuel pump to empty the fuel into a suitable container.
j.
Fuel filter
The fuel tank of this product is fitted with a filter located at
the free end of the fuel pipe. Ask an authorised service centre
or similar qualified person to check and where necessary
replace it at regular intervals.
k.
Spark plug
NOTE! This engine uses a RCJ6Y spark plug with 0.6-
0.7mm electrode gaps. Use a suitable replacement and
replace once a year.
1)
Inspect the spark plug at least every 25 hours or prior to
long-term storage over 30 days if the use has not been this
high. Clean or replace with a new spark plug if necessary.
2)
Unplug the spark plug connector. Loosen the spark
plug
with the spark plug wrench anticlockwise and
carefully
remove it.
3)
Check the spark plug for damage and wear. The colour of
the electrode should be light brown coloured.
4)
Remove debris from the electrode with a soft wired brush;
avoid heavy cleaning of the electrode.
