34
12)
Screw the bumper anti-clockwise until it is
completely and safely locked.
13)
Remove the spindle lock rod.
WARNING! After changing the trimming line, run
the product under no load for at least a minute
to make sure that the line and the product are
operating correctly!
WARNING! Never use steel thread! Always
use cutting means in perfect condition, free of
damage!
d. Blade (Hedge Trimmer)
1)
Keep the hedging blade clean and free of debris.
Remove
trimmings.
2)
Keep the hedging blade sharp to retain a good cutting
performance. Replace a worn or damaged cutting blade with
a new one of the same type.
3)
Lubricate the hedging blade after each use to prolong
the
life span of cutting blade and product. Apply light machine
oil
along the edge of the cutting blade.
e. Blade (hedge trimmer)
1)
Keep the hedging blade clean and free of debris.
Remove
trimmings.
2)
Keep the hedging blade sharp to retain a good cutting
performance. Replace a worn or damaged cutting blade with
a new one of the same type.
3)
Lubricate the hedging blade after each use to prolong
the
life span of cutting blade and product. Apply light machine
oil
along the edge of the cutting blade.
f. Replace chain and guide bar
1)
Use only the guide bar and saw chain according
to the
technical data of the product.
WARNING! Always use a saw chain designed
as “low-kickback” or a saw chain which meets
the low-kickback requirements! A standard saw
chain (a chain which does not have the kickback
reducing guard links) should only be used by an
experienced professional operator! Nevertheless,
a low-kickback saw chain does not completely
eliminated kickback! A low-kickback or “safety”
chain should never be regarded as complete
protection against injury!
