Hawksmotor TOOLSTATION 62625 Original User Instructions Download | Manualshive

Page: 48 / 48

background image

5

GUARANTEE

Toolstation products deliver reliable service for normal, household use in domestic settings. All
Toolstation products are individually tested before leaving the factory.
If you are a consumer and you experience a problem with your Toolstation product, which is found
to be defective due to faulty materials or workmanship within the Guarantee Period, this Toolstation
Guarantee will cover repair or - at the discretion of Toolstation – replacement with a functionally
equivalent Toolstation product.
Your product is under guarantee for 2 year from the date of purchase or the date of delivery of the
product, if later.

The guarantee is subject to the following provisions:

-

The guarantee does not cover accidental damage, misuse, cabinet parts, knobs, or consumable
items.

-

The product must be correctly installed and operated in accordance with the instructions
contained in this manual.

-

It must be used solely for domestic purpose.

-

The guarantee will be retendered invalid if the product is re-sold or has been damaged by
inexpert repair.

-

Specifications are subject to change without notice.

-

The manufacturer disclaims any liability for the incidental or consequential damages.

-

The guarantee is in addition to, and does not diminish your statutory or legal rights.

CUSTOMER SUPPORT

www.coreservice.co.uk
Call us +44 01904 947568
Email: [email protected]

Made in China

8

«
...
46
47
48

Summary of Contents for TOOLSTATION 62625

















































Reviews:

No comments

Related manuals for TOOLSTATION 62625

Brand: parktool Pages: 2

Brand: Makita Pages: 40

Brand: Chicago Pneumatic Pages: 32

Brand: PowerBox Systems Pages: 30

Precision Air V5

Brand: CONWIN Pages: 2

Brand: Matco Tools Pages: 21

Brand: Hammerhead Pages: 60

Brand: JAMEC PEM Pages: 4

6130-01-452-2777

Brand: Tesla Pages: 54

Brand: Good Will Instrument Pages: 23

Brand: King Industrial Pages: 11

Brand: Leister Pages: 60

Brand: StarTech.com Pages: 4

Origo Mig C420 PRO

Brand: ESAB Pages: 30

Brand: Nitronic Pages: 54

Brand: Klein Tools Pages: 4

Brand: Goodson Pages: 2

Brand: Rosslare Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands