Hawksmotor TOOLSTATION 62625 Original User Instructions Download | Manualshive

Page: 22 / 48

background image

22

1)

Adjust the length of the harness so that the hook is

approximately 15 cm below your waist; locate the product to

the harness by using the securing clip ensuring that the angle

of the cutting head is parallel to the surface being cut.

2) In case of emergency, pull the rope of the quick release
mechanism. The metal locking bar will be released from
the securing clip automatically because of the weight of the
machine, and the machine will drop away from you.

3. Operation
a. Fuel and engine oil

This product is equipped with a 2-stroke engine, the fuel
and oil tank are combined and it is essential to fill a fuel-oil
mixture before operating this product. Observe the technical
specifications for suitable fuel and engine oil.

WARNING! This product is not supplied with fuel-
oil mixture in the engine! Before operating this
product it is essential to fill it with fuel!

WARNING! Fuel and oil are highly inflammable!
Fumes will explode if lit! Ensure that there are no
naked flames around the product! Do not smoke
while filling fuel and oil!

1) Place the product on a stable, level surface. We
recommend laying a non-flammablevsheet under the product.
2) Mix a regular-grade unleaded petrol and a quality engine oil
for air cooled 2 stroke engines in a suitable container.
3) Use an anti-oxidant added quality oil expressly labelled for
air-cooled 2 stroke engine use (JASO FC GRADE OIL or ISO
EGC GRADE). Do not use BIA or TWC (2 stroke water cooling
type) mixed oil.

«
...
20
21
22
23
24
...
»

Summary of Contents for TOOLSTATION 62625

















































Reviews:

No comments

Related manuals for TOOLSTATION 62625

Brand: Makita Pages: 60

Brand: Earlex Pages: 4

Brand: Laser Pages: 8

Brand: Davey Water Products Pages: 4

Brand: Paslode Pages: 16

Brand: U-Line Pages: 3

Brand: Mitox Pages: 40

Weller Pyropen Jr.

Brand: Cooper Hand Tools Pages: 31

Brand: N2Power Pages: 10

Brand: Far Tools Pages: 46

Brand: Gardebruk Pages: 34

DiamondHone 314

Brand: Chef'sChoice Pages: 12

Brand: Jet Pages: 40

Brand: Campbell Hausfeld Pages: 15

Brand: Chicago Electric Pages: 16

Brand: RASOR Pages: 15

Brand: B&G Pages: 2

Brand: Lincoln Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands