38
5) Dry the spark plug with a soft cloth if it is wet from fuel.
6) Check the spark plug gap; it should be 0.6 - 0.7 mm.
7) Replace with a new spark plug if either the electrode or the
insulation is damaged
8) When replacing the spark plug, first screw it in hand tight
and then lightly tighten it with the spark plug wrench.
WARNING! Do not over-tighten the spark plug to
avoid any damage!
l. Bevel gear
The bevel gear is filled with grease. Ask an authorised service
centre or similar qualified person to check the quantity
regularly and fill up using proper grease if necessary.
m. Carburettor
The carburettor is pre-set by the manufacturer. Should it be
necessary to make any changes please contact an authorised
service centre or a similarly qualified person. Do not attempt
to make any adjustments by yourself.
n. Repair
This product does not contain any parts that can be repaired
by the consumer. Contact a qualified specialist to have it
checked and repaired.
o. Storage
1) Clean the product as described above.
2) Store the product and its accessories in a dry, frost-free,
well-ventilated place.
3) Always store the product in a place that is inaccessible to
children. The ideal storage temperature is between 10 and
30°C.
4) We recommend using the original package for storage
or covering the product with a proper cloth or enclosure to
protect it against dust.
