Hawking HDWABN1, Manual

Page: 49 / 96

42
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz
(G), only wireless clients using the wireless band
you select (802.11b, 802.11 Draft-N, or 802.11g)
will be able to connect to this Hi-Gain Outdoor
Wireless-N Access Point.
If you select 2.4GHz (B+G), then only wireless
clients using 802.11b and 802.11g band will be
able to connect to this Hi-Gain Outdoor
Wireless-N Access Point.
If you want to allow 802.11b, 802.11g, and 802.11
Draft-N clients to connect to this Hi-Gain Outdoor
Wireless-N Access Point, select 2.4GHz (B+G+N).
MAIN ESSID Please input the ESSID (the name used to identify
this wireless Hi-Gain Outdoor Wireless-N Access
Point) here. You can input up to 32 alphanumerical
characters. PLEASE NOTE THAT ESSID IS
CASE SENSITIVE.
Multiple ESSID The Hi-Gain Outdoor Wireless-N Access Point
supports multiple SSID function; up to four SSIDs
can be set. If you want to configure additional
SSIDs, please click this button. For detailed
descriptions of the function, please refer to Section
2-4-1-1.
Channel Number Please select a channel number you wish to use.
The channel number must be same with another
wireless Hi-Gain Outdoor Wireless-N Access Point
you wish to connect
Associated Clients Click ‘Show Active Clients’ button and a new
popup window will appear which contains the
information about all wireless clients connected to
this Hi-Gain Outdoor Wireless-N Access Point. You
can click ‘Refresh’ button in popup window to keep
information up-to-date.
MAC address 1-4 Please input the MAC address of the wireless
Hi-Gain Outdoor Wireless-N Access Point you
wish to connect