50
will be displayed here.
Config Mode
There are ‘Registrar’ and ‘Enrollee’ modes for the
WPS connection. When ‘Registrar’ is enabled, the
wireless clients will follow the Hi-Gain Outdoor
Wireless-N Access Point’s wireless settings for
WPS connection. When ‘Enrolle’ mode is enabled,
the Hi-Gain Outdoor Wireless-N Access Point will
follow the wireless settings of wireless client for
WPS connection.
Start PBC
Click ‘Start PBC’ to start Push-Button style WPS
setup procedure. This Hi-Gain Outdoor Wireless-N
Access Point will wait for WPS requests from
wireless clients for 2 minutes. The ‘WLAN’ LED on
the Hi-Gain Outdoor Wireless-N Access Point will
be steady on for 2 minutes when this Hi-Gain
Outdoor Wireless-N Access Point is waiting for
incoming WPS request.
Start PIN
Please input the PIN code of the wireless client
you via client wish to connect, and click ‘Start PIN’
button. The ‘WLAN’ LED on the Hi-Gain Outdoor
Wireless-N Access Point will be steady on when
this Hi-Gain Outdoor Wireless-N Access Point is
waiting for incoming WPS request.
NOTE: When you’re using PBC type WPS setup, you must press
‘PBC’ button (hardware or software) of wireless client within 120
seconds; if you didn’t press PBC button of wireless client within
this time period, please press ‘PBC’ button (hardware or software)
of this Hi-Gain Outdoor Wireless-N Access Point again.
Summary of Contents for HDWABN1
