Hawking HDWABN1, Manual

Page: 20 / 96

13
2-2 Connecting to wireless Hi-Gain Outdoor Wireless-N Access
Point by web browser
After the network connection is built, the next step you should do is
setup the Hi-Gain Outdoor Wireless-N Access Point with proper network
parameters, so it can work properly in your network environment.
Please use the web browser to configure the Hi-Gain Outdoor Wireless-N
Access Point. A computer with wired Ethernet connection to the Hi-Gain
Outdoor Wireless-N Access Point is required for this first-time
configuration.
Before you staring to configure the Hi-Gain Outdoor Wireless-N Access
Point, please configure the IP address of the computer in the same
network segment with the Hi-Gain Outdoor Wireless-N Access Point.
If the operating system of your computer is….
Windows 95/98/Me - please go to section 2-2-1
Windows 2000 - please go to section 2-2-2
Windows XP - please go to section 2-2-3
Windows Vista please go to section 2-2-4
2-2-1 Windows 95/98/Me IP address setup
1. Click ‘Start’ button (it should be located at lower-left corner of your
computer), then click control panel. Double-click
Network icon, and
Network window will appear. Select ‘TCP/IP’, then click ‘Properties’.