Haulotte Group STAR 13 P Maintenance Book Download Page 96

Page: 96 / 136

4000562980

E 07.16

USA / GB

Chassis

Steering cylinder replacement

MS0086

6 - Reinstall

• Re-connect the hoses to the cylinder.

• Operate the steering towards the right side, to align the cylinder with the pivot.

• If you cannot align easliy with the pump, turn the wheels slightly by kicking them ir tapping with a soft hammer.

• Refit the top cover plate.

• Remove the safety support and lower the mast.

7 - Checks

• Switch the machine on.

• Engage drive and steering. Check there are no leaks or abnormal noises.

• Install the bore end (front side) pivot pin, refit the washer and circlip.

• Install the rod end pin of the cylinder (fixed to the pivot), refit the washer

and circlip.

Summary of Contents for STAR 13 P









































































































































Search results

Summary of Contents for STAR 13 P

Reviews:

Related manuals for STAR 13 P

Brands by name

Popular brands

Haulotte Group STAR 13 P, Maintenance Book

Search results

Summary of Contents for STAR 13 P

Reviews:

Related manuals for STAR 13 P

Brands by name

Popular brands