Haulotte Group STAR 13 P Maintenance Book Download Page 38

Page: 38 / 136

4000562980

E 07.16

USA / GB

STAR 6 P - STAR 13 P

- Familiarization

5.1 - GREASING POINTS LOCALIZATION

• Mast lubrication :

6 - Machine specifications

6.1 - MOVEMENT SPEED

To allow checking operation, refer to the following table about originally time per movement. If the
values measured by test are not equal to the following :
• Do not use the machine.

• Setting updating is needed.

Always check speed movement from the ground control box.

• Wheel steering pivots : 2 on the chassis.

Lubricate the pivots with lead-free grease.

STAR 6 P- STAR 13 P

Micro drive speed

0,8 km/h / 0.5 mph

High drive speed

4,5 km/h / 2.8 mph

Maximum towing speed

4,5 km/h / 2.8 mph

Time for mast lifting

16 s

Time for mast lowering

19 s

Summary of Contents for STAR 13 P









































































































































Search results

Summary of Contents for STAR 13 P

Reviews:

Related manuals for STAR 13 P

Brands by name

Popular brands

Haulotte Group STAR 13 P, Maintenance Book

Search results

Summary of Contents for STAR 13 P

Reviews:

Related manuals for STAR 13 P

Brands by name

Popular brands