Haulotte Group STAR 13 P Maintenance Book Download Page 76

Page: 76 / 136

4000562980

E 07.16

USA / GB

Chassis

Tires (Tyres) - Wheel replacement

MS0102

4 - Wheel and tires/tyres inspections

Replace the wheels and the tires/tyres if any of the following conditions exist
:

• Presence of cracks, damage, deformation or other faults on the hub

• Damage to the tire :

• Cut or hole > 3 cm (2 in) in the rubber side wall.

• Blister or pronounced lump on the external and lateral wall.

• Damaged wheel stud.

• Damage or wear on the side wall to the extent that the reinforcing wire is

visible.

• Consistent wear of the ground contact surface greater than 25%

Tires and rims are critical components for the stability of the machine. For safety reasons. :
• Use only HAULOTTE® spare parts according to the technical characteristics of the machine. Refer to

the spare parts catalog.

• Never replace foam filled tire with a pneumatic (air filled) tire.

Summary of Contents for STAR 13 P









































































































































Search results

Summary of Contents for STAR 13 P

Reviews:

Related manuals for STAR 13 P

Brands by name

Popular brands

Haulotte Group STAR 13 P, Maintenance Book

Search results

Summary of Contents for STAR 13 P

Reviews:

Related manuals for STAR 13 P

Brands by name

Popular brands