Haulotte Group STAR 13 P, Maintenance Book

Page: 122 / 136

122 4000562980 E 07.16 USA / GB
STAR 6 P - STAR 13 P
E
- Trouble shooting and diagram
Failure Code C Description
F08 : Electric circuit
Supply F08.04 (A)
1 Zapi failure code 18 on Combiacx
2 Zapi failure code 27 on Combiacx
4 Zapi failure code 36 on Combiacx
8 Zapi failure code 60 on Combiacx
16 Zapi failure code 18 on Acex
32 Zapi failure code 27 on Acex
64 Zapi failure code 36 on Acex
128 Zapi failure code 60 on Acex
Control Box
incoherence
F08.07 (A)
1 SA901B=0 & SA901C=0
2 SA901B=1 & SA901C=1
Common outputs
supply
F08.09 (D)
1 Zapi failure code 50 on Combiacx
2 Zapi failure code 50 on Acex
Power supply F08.10 (D)
1 Zapi failure code 38 on Acex and Zapi failure code 38 on Combiacx
2 Zapi failure code 24 on Acex
3 Zapi failure code 46 on Acex
Failure Code C Description
F10 : Functions
Steering angle not
calibrated
F10.14(D) 1 Steer angle not calibrated
Failure Code C Description
F12 : Internal faults
CAN Fault
Check wiring
F12.01 (A)
1 Cantiller RX failure
2 Screen RX failure
4 Zapi failure code 39 on Combiacx
8 Zapi failure code 39 on Acex
16 No time (date/hour) update (problem with screen communication)
E2P Read / Write
Error
Change calc.
F12.02 (D)
1 EEPROM failure status error
2 EEPROM failure stack full
4 Zapi failure code 25 on Combiacx
8 Zapi failure code 69 on Combiacx
16 Zapi failure code 25 on Acex
32 Zapi failure code 69 on Acex
64 Read EEPROM during init failed
E2P Param Reset
Check SETTINGS
F12.04 (D)
ID of software loaded into machine is different from the ID stored into
EEPROM : All machine parameters have been reset and must then be
set again (speeds, ramps, options, configs, access code level 2, failure
counters and calibration data).
E2P Param Not
Set
F12.05 (A)
1 Model not set
2 Country not set
4 Serial number = 0
8 At least one of the parameter used and not set
16 At least one option used and not set
32 At least one config not set
ECU software
version
incoherence
F12.07 (A) 1 Zapi software version different on Combiacx and on Acex