Haulotte Group H21TX, Operator'S Manual

Page: 77 / 104

A
B
C
D
E
F
G
H
I
77 2420331900 E06.14 EN
Telescopic machines, 21 - 25 m
F
- Special procedure
4.1.1.4 - Procedure for the use of slings - H21TX (HB62) - H23TPX (HB68J) - H25TPX (HB76J)
The machine must be completely stowed, boom in horizontal position and turret oriented at
90° in relation to the axis of the chassis.
Designated lifting points are marked/labled with the following symbol .
1. Line up the spreader beams with the chassis.
2. Fold up the 4 slings 4 m (13 ft 1 in) 4 T over the axles with protective sheathing
positioned appropriately. Adjust properly to prevent any damage to the machine.
3. Fasten the slings with shackles.
Make sure that the steering rods and associated hoses are not captured by the slings over the axle.
Pay particular attention to avoid slings over sharped edged surfaces as they may be severed/damaged.
Properly adjust rigging to keep the machine level and to minimize the risk of damage to the machine.
• Lifting procedure must be handled very carefully.
• All movements of the machine must be performed slowly and deliberately to minimize swaying of the
machine being lifted.
• Always keep machine as close as possible to the ground level.