Haulotte Group H21TX, Operator'S Manual

Page: 53 / 104

A
B
C
D
E
F
G
H
I
53 2420331900 E06.14 EN
Telescopic machines, 21 - 25 m
D
- Operating principle
2.6 - LOAD LIMITING IN THE PLATFORM (IF FITTED)
If the platform load exceeds the maximum authorized load, no movement is
possible from the platform control box.
The platform overload indicator and the buzzer warn the operator that the
overload condition exists.
To return the machine to normal operation remove some weight from the platform.
2.7 - CHASSIS TILT
For H21TX (HB62)
If the machine is located on a slope greater than the permissible slope, the platform control
box's fault indicator and the buzzer warn the operator.
Driving is cut (If the machine is unfolded).
To restore the drive function, only movements allowing the machine to be stowed are
permitted :
• Telescope in.
• Lowering the boom to return to a horizontal position.
For H23TPX (HB68J) -H25TPX (HB76J)
If the machine is located on a slope greater than the permissible slope, the platform control
box's fault indicator and the buzzer warn the operator.
Driving is cut (If the machine is unfolded).
To restore the drive function, only movements allowing the machine to be stowed are
permitted :
• Telescope in.
• Lowering the boom to return to a horizontal position.
• Lowering the jib until it is below horizontal position.