Haulotte Group H21TX, Operator'S Manual

Page: 80 / 104

80 2420331900 E06.14 EN
Telescopic machines, 21 - 25 m
F
- Special procedure
Loading characteristics
Loading characteristics
4.3 - UNLOADING
1. Unlock the turntable rotation locking pin.
2. Remove the tie downs.
3. Start the machine.
4.4 - WARNING
To unload the machine, select low driving speed .
Marking Description H21TX (HB62)
B
Lateral distance between the wheels
(1)
.
(1.) Check the technical data in the technical characteristics
2,49 m(8 ft2 in)
C
Front wheel ground pressure
((1.))
12,5 daN/cm² (2,56 lbf/sq.ft)
D
Rear wheel ground pressure
((1.))
12,5 daN/cm² (2,56 lbf/sq.ft)
Anchorage point
Turntable rotation locking
Marking Description H23TPX (HB68J) H25TPX (HB76J)
B
Lateral distance between the wheels
(1)
.
(1.) Check the technical data in the technical characteristics
2,49 m(8 ft2 in) 2,49 m(8 ft2 in)
C
Front wheel ground pressure
((1.))
13 daN/cm² (2,66 lbf/sq.ft) 13 daN/cm² (2,66 lbf/sq.ft)
D
Rear wheel ground pressure
((1.))
13 daN/cm² (2,66 lbf/sq.ft) 13 daN/cm² (2,66 lbf/sq.ft)
Anchorage point
Turntable rotation locking
Before operating, check that the machine is in good condition.
If the machine has been damaged during transportation, contact the transporter in writing.
Upon starting a machine that has been secured then transported, the safety system may detect a false
overload forbidding all movement from the platform control box.
To reinstate the system, lift the jib a few centimetres from the ground control box.
Do not travel down the ramp at a fast speed.