Hatco Toast-Qwik TQ3-2000 series, Installation And Operating Manual

Page: 11 / 44

Form No. TQ3CEM-0618
11
OPERATION
Adjusting Automatic PowerSave
Use the following procedure to enable/disable the automatic
PowerSave feature as well as make adjustments to its settings.
1. Touch the
icon on the Menu Screen. A password
screen will appear.
Firmware
Control
Testmode
Version
Usage
PowerSave
Exit
Service
• Enter the 3-digit password “248”.
The Service screen will appear.
2. Touch POWERSAVE on the
Service screen. The Automatic
PowerSave screen will appear.
3. Make the desired adjustments on
the Automatic PowerSave screen.
Automatic PowerSave
On Off
Heat 47 %
Time 9 mins
EXIT
• Touch ON to enable automatic
PowerSave. Touch OFF to
disable automatic PowerSave.
• Heat : Touch the or arrow
next to the Heat percentage to
change the heat output level of the elements during
PowerSave mode.
• Time : Touch the or arrow next to the Time value
to change the number of minutes of inactivity required
before automatic PowerSave is activated.
4. When all adjustments are done, touch EXIT to return to
the Service screen, then EXIT again to return to the Menu
Screen.
Changing Control Settings
Use the following procedure to make changes to control access
privileges and toaster operation.
1. Touch the
icon on the Menu Screen. A password
screen will appear.
Firmware
Control
Testmode
Version
Usage
PowerSave
Exit
Service
• Enter the 3-digit password “248”.
The Service screen will appear.
2. Touch CONTROL on the Service
screen. The Control Settings
screen will appear.
3. Make the desired adjustments on
the Control Settings screen.
Control Settings
On Off Passcode
On Off ColorGuard
On Off Logo
EXIT
• Touch ON or OFF to enable or
disable each of the operational
settings shown on this screen.
• Passcode : Enable this setting
to require a password to make
changes to menu item settings.
•
ColorGuard
: Disable this setting to turn off the ColorGuard
System, as described in the MODEL DESCRIPTIONS
section of this manual.
• Logo : Enable this setting to put the toaster into a single
setting, “always on” mode.
4. When all changes are done, touch EXIT to return to the
Service screen, then EXIT again to return to the Menu
Screen.