Hasselblad CF22 CF39 User Manual Download Page 47

Page: 47 / 65

MAIN MENU > SETTINGS > Camera

The camera choices that appear on the menu are automatically restricted to the adapter you have

fitted. So, if you have have fitted an adapter specifically intended for Hasselblad models, then only

Hasselblad models will appear. The following is a description of settings and action needed when

working with the various Hasselblad models.

The exposure time set on a CF digital back sets the maximum length of exposure. The

default setting is 1/8 sec and this is the setting that can be kept for all exposures from 1/8

sec. However, this setting should be changed in accordance with the time required if it

exceeds 1/8 sec. Times of up to 32 seconds can be set.
If you prefer, you can connect the ‘Flash sync input cable’ between the lens PC socket

and a CF digital back which allows you to retain the default setting of 1/8 second while

still being able to use exposure times longer than 1/8 second. This method also allows

the use of the B setting.

Model setting variations

Look in the list below for the camera model you are using and make the appropriate set-

tings change. Don’t forget to change the setting if you change camera model!
Please note that certain connection cables /cords are only included as accessories to

certain adapters. Please see adapter manuals for further information.

Winder CW

For use with 503 CW models

• Make a

Winder CW

setting.

• If you want to control the camera from FlexColor, connect the

Exposure cable 503

between a CF digital back and the Winder CW.

• Do not use the winder at rapid sequence setting.

ELD

For use with ELD models:

• Make an

ELD

setting.

• A B setting exposure can be made by choosing the “Bulb” in the “Exposure Time” setting.

The maximum exposure time remains at 32 seconds however.

Navigating the

CAMERA settings

Hasselblad 503CW plus Winder CW with

Exposure cable 503 in place showing

connection from Winder to adapter.

Exposure Cable 503

Please note that this

particular list is only

an illustration.
Camera choice

displayed will vary

according to adapter

fitted.

Summary of Contents for CF22 CF39


































































Search results

Summary of Contents for CF22 CF39

Reviews:

Related manuals for CF22 CF39

Brands by name

Popular brands

Hasselblad CF22 CF39, User Manual

Search results

Summary of Contents for CF22 CF39

Reviews:

Related manuals for CF22 CF39

Brands by name

Popular brands