Hasselblad CF22 CF39 User Manual Download Page 46

Page: 46 / 65

Setting the options under the User Interface menu

Each of the above entries can be set by similar menu navigation.

Language, Power Down and Mark Overex can be set immediately

by the

buttons while Sound, Date & Time and Display

require another move to sub menu for final choice.

Proceed as follows:

1. Press the menu (

MENU

) button to open the menu.

2. Use



and



to select the

SETTINGS

sub-menu.

3. Press



to open the

SETTINGS

menu.

4. Press



to open the

USER INTERFACE

sub-menu.

5. Use



and



to select the required entry.

6. Press either the

button to make the new settings in

the case of Language, Power Down and Mark Overex or Press



again to access Sound, Date & Time and Display

7. Press the

MENU/EXIT

button again to save the new settings

and close the menu.

Summary of Contents for CF22 CF39


































































Search results

Summary of Contents for CF22 CF39

Reviews:

Related manuals for CF22 CF39

Brands by name

Popular brands

Hasselblad CF22 CF39, User Manual

Search results

Summary of Contents for CF22 CF39

Reviews:

Related manuals for CF22 CF39

Brands by name

Popular brands