Hasler IN750 Series User Manual Download

Page: 277 / 306

Cleaning the Feeder Belts and Rollers

Follow the steps below to clean the belts and rollers of the feeder and of the Dynamic Scale
(if installed).

How to Clean the Feeder Belts and Rollers

To clean the feeder belts and rollers:

Open equipment covers; in the Mixed-Size Feeder, press the left of the upper blue
handle to release and lift up the drive assembly.

Clean the belts and/or rollers with a damp cloth or 70° alcohol on a cotton applicator.

Push down the upper drive assembly until it locks back into position and close the
feeder cover.

Maintaining

your

Mailing

System

271

| Page 271 | jul-08-2013 06:34 |

Summary of Contents for IN750 Series



















































































































































































































































































































Search results

Summary of Contents for IN750 Series

Reviews:

Related manuals for IN750 Series

Brands by name

Popular brands

Hasler IN750 Series, User Manual

Search results

Summary of Contents for IN750 Series

Reviews:

Related manuals for IN750 Series

Brands by name

Popular brands