Hasler HJ500P, Operating Manual, Page: 27 / 40

Section 3 – Operating The HJ500P HJ500P
Hasler
®, Inc. 04/2004 Page-19
Printing
To make the HJ Printer the default printer for this application click on Print , then select Printing Options.. .
When the “Printing Options” window opens select the Printers tab and highlight Labels: Non-Presorted Labels or
Labels: Presorted Labels, then click on the Change Printer button. Select the HJ Printer from your printer menu.
And click OK . You are now ready to print the job.
1. If you have not already done this, select Print , Non-presorted Labels , Template Design and select
the template you created. Click Select
2. Then select Print , Non-Presorted Labels , Print and click OK . If the HJ printer is not selected,
select it and click OK to print the job.
Print Recovery After Jam
If the media should jam in the printer during the run it is possible to recover up to 10 pieces that might be lost. If
a jam occurs, the printer control panel will display “Jam: Reprint Lost pieces”.
To recover the lost pieces do the following:
1. Press the MENU key and use the + key to step to the “Address Recovery” routine.
2. Press the ENTER key and the following display will appear “Enter: Recover 1 piece”.
3. Use the + key to select the number of pieces you wish to recover.
NOTE: The next two pieces are in the printer buffer when the jam occurred, so if you want to recover the piece
that jammed step to 2 pieces. If you want to recover the piece before the piece that jammed and the next piece
enter 3. You can recover from 2 to 10 pieces that were printed by using the + key to step to the number of
pieces you wish to recover.
4. Next, press the ENTER key again to register the number of pieces to be recovered.
5. Then press the ENTER key again to restart the printer.
6.
You may repeat this process as many times as required. When you reach the end of the database if the last
piece jams, then enter 1 piece to be recovered.