Hasler HJ500P, Operating Manual, Page: 19 / 40

Section 3 – Operating The HJ500P HJ500P
Hasler
®, Inc. 04/2004 Page-11
To start printing click on File , then Print . The Print window
will open. If you wish to print the job click on OK . If you wish
to use the special features built into the HJ500P drivers.
Clicking on the Properties button will open the properties
window in Windows 95, 98, NT, or ME.
If you are using Windows 2000 or XP the window on the right
will open. Clicking on Advanced will open the Options
window. In the following illustrations the windows for
Windows 95, 98, NT, and ME will be on the left. The
windows for Windows 2000 and XP will be on the right.
When the properties window opens you are presented with
several tabs in Windows 95, 98, . The following are
standard windows printer driver functions and should be left
at their defaults
: Graphics , Fonts , and Device Options .
The
Features and Print Heads tabs are used to setup,
change, and adjust the printer.
Features Tab
The Features Tab/ Advanced Options depending on the operating system is used to change the speed and
resolution of the Printer, to add a delay to the feed to provide separation between the pieces, and to print and
overlay with the job. The first feature is the Print Quality which has two settings. One for the Resolution of the
print quality and the second for the appropriate speed. Changing the resolution to a higher number e.g. 200 DPI
to 600 DPI will increase the quality of the image. When the resolution is changed the Belt speed (IPS) is
automatically changed to the optimum speed for the resolution selected.