Hasler HJ500P, Operating Manual, Page: 18 / 40

Section 3 – Operating The HJ500P HJ500P
Page-10 03/2004
Hasler
®, Inc.
Purge – The purging function is useful to clear the printhead nozzles when the machine has been sitting idle
for a period of time. To activate the purge, press the ENTER key and feed media. To stop the purge press,
ENTER again.
Print Enhancement – Pressing the “ + ” or “ - “ key will bring this message up in the display. The print
enhancement feature is used when printing to ensure that the nozzles on the printhead stay open and
prevent the loss of the descender on letters such as “y” or “q” and accent marks that do not appear in every
address. Pressing the
ENTER key will turn this function ON or OFF. The function will remain as changed
until the operator changes it again. Turning the printer ON and OFF will not affect the setting.
Installing New Printheads – The printer is capable of telling you when a printhead is running low of ink. To
use this feature press the MENU key momentarily, then use the “ + ” or “ - “ key to highlight “Enter when head
( n ) is filled”. Press the ENTER key and install a new cartridge. Repeat for each cartridge you install. When
the ENTER key is pressed the display will change to “Head ( n ) has a new cartridge”. To check the level of
ink in the cartridges, Press and hold the TEST PRINT key until the “Service Menu” appears. Use the “+” or
“-“ key to scroll to the “Service Menu: Ink Levels, 100%100%100%”. This will show how much ink remains in
the cartridge.
NOTE: This feature only works if the cartridges remain in the original head where they were installed. If you
swap the cartridges from one head to another, the levels will not be accurate.
There is a second set of menus available in the display. To activate them press and hold the MENU key
until the “Setup Menu” appears. You can step through these items with the “ + ” or “ - “ key.
Total Count – The total count displayed is the total number of prints that have passed through the printer. It
is non-resettable.
BIOS Version – The version of the BIOS is displayed in this menu when the “ + ” key is pressed once. From
time to time it may be necessary to upgrade the BIOS in the printer. When this is done, the new BIOS
version can be checked in this manner.
Bulk Ink – This feature is not used on the HJ500P. No provisions are made to install the larger cartridges.
+ / - key -
In the various menu modes these keys are used to step through the options.
ON LINE key -
The printer automatically goes on line and the light in the ON LINE key lights when there is
information from the computer to print. Pressing the ON LINE key during the printing operation will take the
printer off line and stop the printing. To reset the printer to its ready state, turn it off line then press and hold the
RESET key until the light in the TEST PRINT key blinks.
RESET key -
The RESET key is used to clear the printer memory and return it to the wait state. This key only
functions if the printer is off line.
Printer Driver Properties
The printer driver describes to the printer how to print your job. It controls the operation of the printer and allows
you to send fixed and variable text and graphics to the printer. Within your data management software is a print
function. In that print function is a properties button. It is through the properties that you control the output of
your printer. The following describes the properties windows for the HJ500P and how to use them to customize
the output of your printer.