Hasler HJ500P, Operating Manual, Page: 11 / 40

Section 1 – Getting Acquainted HJ500P
Hasler
®, Inc. 04/2004 Page-3
Control Panel
1.
ON LINE key – The indicator on this key lights when data is sent to the HJ500P
and they are ready to begin printing. This key also turns the printer off line so
that the menu mode can be accessed.
2.
-
key – In the menu mode this key will scroll to the previous selection.
3.
ENTER key – This key starts and stops the printing.
4.
FAULT Indicator – This indicator lights when there is a problem with the printing
process.
5.
RESET key – This key will reset the printer to its wait state.
6.
+
key – When the printer is in the menu mode this key will scroll to the next
selection.
7.
MENU key – This key causes the printer to enter the menu mode where several
operator functions can be accessed.
8.
TEST PRINT key – Pressing this key will put the printer in the test mode and
send a sample copy to check the printer’s output.
9.
OPERATOR DISPLAY – Indicates the printer’s status including menus and error
messages.
10.
MEDIA THICKNESS – The knob on the right side of the control panel is used to
adjust the height of the print heads to compensate for different media thickness.
NOTE: A complete description of the functions and operation of the printer keys can be found in Section 3 –
Operating the HJ500P.