Hasler HJ 3630 Operating Manual Download Page 91

Page: 91 / 211

User Manual Version 3.1

Ram

The printer will test its internal memory.

Pos: 73.122 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3204_Ram Contin. @ 0\mod_1254915740236_912.doc @ 5007 @

Ram Contin.

The printer will test its internal memory.

Pos: 73.123 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3205_NV-Ram Cont. @ 0\mod_1254915736642_912.doc @ 4983 @

NV-Ram Cont.

The printer will test its internal memory.

Pos: 73.124 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3212_Encoder @ 0\mod_1254916090905_912.doc @ 5039 @

Encoder

The printer will start its transport and test the encoder signals.

Pos: 73.125 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3214_Speed Measurement_All_Printers_except_Orbit @ 1\mod_1255683471390_912.doc @ 6627 @

Speed Measurment

This feature is used to check the currently set speed. The printer will start the transport
with the currently set speed (e.g.

1.080 Meter/Second 212.5 Feet/Minute

) and display

the actual measured speed in the display.

Pos: 73.126 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3219_Paper Sensor @ 0\mod_1254916094577_912.doc @ 5067 @

Paper Sensor

This feature is used to check the status of the paper sensor (top of form sensor).

Status Note

Sensor is free

The sensor detects no material.

Sensor is not free

The sensor detects material.

Pos: 73.127 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3220_Sensor&Paper Run @ 1\mod_1255684001736_912.doc @ 6647 @

Summary of Contents for HJ 3630




















































































































































































































Search results

Summary of Contents for HJ 3630

Reviews:

Brands by name

Popular brands

Hasler HJ 3630, Operating Manual

Search results

Summary of Contents for HJ 3630

Reviews:

Brands by name

Popular brands