HARWI ORCA 1850, Manual

Page: 35 / 79

35
DIGITAL READ OUT (OPTIONAL)
The digital read out is used for accurate
adjusting of the measure for cutting
horizontally. The measure can be adjusted
from bottom supports, from the midway
fences and from the top side of the material.
ADJUSTING FROM THE BOTTOM SUPPORTS
1
Put the saw unit in horizontal position
(Fig. 38)
2
Press button . The digital read out
shows ABS (Fig. 39A).
3
Absolute measuring is now activated.
4
Fasten the motor carriage with the knob
at the right side at the correct height.
ADJUSTING FROM THE MIDWAY FENCES
1
Put the saw unit in horizontal position
above the midway fences (Fig. 38).
2
Press button , the digital read out
shows a small arrow (Fig. 39B).
3
Measuring from the midway fences is now
activated.
4
Fasten the motor carriage with the knob
at the right side at the correct height.
Fig. 38
Fig. 39A-B