25
MAINTENANCE
CLEANING
Clean the machine, specially the work spots
and the aluminium strips, frequently.
Perform following maintenance weekly:
1
Clean tracks at the lower and upper side
of the frame.
2
Clean bearings at the down and upper
side of the slide-way.
3
Clean tracks of the slide-way and clean
bearings of the carriage.
4
Clean guiding spindles of pressure pad.
5
Brush the air inlet of the motor and
check if it is not obstructed.
6
Clean spindle of depth adjustment and
lubricate slightly.
7
Check dust extraction.
8
Check the tension of the toothed belt.
Check the following points monthly.
8 Wear and tear of cables.
9 Broken or torn parts of the electric
circuit.
10 Brake time of saw-blade (stopping time
is 10 seconds).
11 Operation of the end switch in the safety
guard.
12 Operation and wear and tear of the
pressure pad.
Summary of Contents for ORCA 1850
