Harvest TEC 442U, Owner'S Manual, Page: 3 / 18

3
Congratulations on purchasing a Harvest Tec Model 442U applicator. This applicator is designed to
apply Harvest Tec buffered acid. The model 442U base kit includes the following parts: tank, frame,
pump, gauge, hose, electronic control box, and miscellaneous hardware. For your convenience we
have included a parts break down for the model 442U applicator. If something goes wrong bring this
manual into the dealer so they can order the correct parts for you. Ordering the correct part number
is very important. It will save you time, money, and your crop.
REFERENCE CHART
BALER MODEL HARVEST TEC MODEL
CASE IH
RB 455A 442U
NEW HOLLAND
Roll-Belt 450 442U
TOOLS NEEDED
For installation of this applicator, the following tools will be required:
-
Standard wrench set
- Standard socket set
-
Standard screw driver or 5/16” nut driver
-
Side cutter
- Hose cutter
- Crescent wrench
-
Hammer