Manual
HM1016ER1
The interpretation of the Symbol
Harsen
®
II
WARNING:
Read this entire manual pertaining to the work to be performed before
installing, operating, or servicing this controller. Practice all plant and safety
instructions and precautions. Failure to follow instructions can cause
personal injury and/or property damage.
The engine or other type of prime mover should be equipped with an over
speed shutdown device to protect against runaway or damage to the prime
mover with possible personal injury, loss of life, or property damage.
The over speed shutdown device must be totally independent of the prime
mover control system. An over temperature or low pressure shutdown device
may also be needed for safety, as appropriate.
CAUTION—BATTERY CHARGING
To prevent damage to a controller that uses an alternator or battery-charging
device, make sure the charging device is turned off before disconnecting the
battery from the system.
Controllers contain static-sensitive parts. Observe the following precautions
to prevent damage to these parts:
Do not disassemble the rear back of controller and touch the components or
conductors on a printed circuit board.
