Manual
HM1016ER1
Parameters Setting
Harsen
®
Page 24/54
Comm. Address:
Used to configure ID address for MODBUS.
Each controller on the same MODBUS has a unique communication address.
Startup mode:
Used to configure the Startup mode of controller when it is powered up.
When parameter is configured as “0”, the controller will be in Manual mode when it is powered up.
When parameter is configured as “1”, the controller will be in Automatic mode when it is powered up.
When parameter is configured as “2”, the controller will be in the mode which is the same as last
time when it is powered up.
Auto scroll time:
Used to configure the cycle of page scroll.
When parameter is configured as “0”, manually scroll page via “
” button.
Start to scroll automatically 30 seconds after not pressing any button.
Default settings:
Some parameters are resumed to default setting.
Password:
There are 3 levels of password (CL0 / CL1 / CL2) for different users.
CL0 for the operator, who can read parameters, start and stop controller. The default setting is no
password.
CL1 for the technician, who has the authority of CL0 and can modify all parameters, the default
setting is “2213”.
CL2 for factory, who have the authority of CL1 and Firmware update, the default setting as “3132”.
All passwords are automatically inactive 60 seconds after exiting menu.
Firmware update:
Used to load and update firmware for controller.
It requires to key in CL2 password.
