4 – Configuration & Operation
NetXpress LX & CM-30 Installation & Operation Manual
Version 1, September 2010
Harris Corporation
4-43
Intraplex Products
TOS Byte Configurations
View and edit both stream and system TOS byte parameters (Figure 4-42). To access this page,
point to
Networking
|
Class of Service
and click
TOS Byte Configurations
.
Figure 4-42. Networking | Class of Service | TOS Byte Configurations
Refresh:
Click to manually refresh the browser.
The system and stream TOS values are the full 8-bit value of the IP TOS field. The defaults are
based on traditional IP precedence. You should change the values based on the routed network
configuration.
Stream TOS Values
TOS Value for High COS:
This field sets the IP TOS (Type of Service) byte for packets from a
stream configured with a high COS (Class of Service). The default value is 184.
TOS Value for Medium COS:
This field sets the IP TOS byte for packets from a stream
configured with a medium COS. The default value is 48.
TOS Value for Normal COS:
This field sets the IP TOS byte for packets from a stream configured
with a normal COS. The default value is 40.
TOS Value for Low COS:
This field sets the IP TOS byte for packets from a stream configured
with a low COS. The default value is 0.
System TOS Values
Web TOS Byte Setting:
This field sets the IP TOS byte used by the HTTP packets coming out of
the NetXpress LX system. The default value is 48.
Voice Signaling TOS Byte Setting:
This field sets the IP TOS byte used by the signaling
transmission packets. The default value is 48.
SNMP TOS Setting:
This field sets the IP TOS byte used by the SNMP packets coming out of the
NetXpress LX system. The default value is 48.
