4 – Configuration & Operation
NetXpress LX & CM-30 Installation & Operation Manual
Version 1, September 2010
Harris Corporation
4-17
Intraplex Products
4.3.2.1 Current Alarms
Use the
Current
Alarms
table (Figure 4-18) to view system-detected alarms, including the date,
time, and description of each. To access this table, point to
Faults
and click
Current
Alarms
. Click
any table header to sort alarm entries in ascending order by that header. On the alarms table, click
the table header a second time to sort in descending order.
Figure 4-18. Faults | Current Alarms
Refresh:
Click
M
to refresh the browser manually, or click
5s
,
10s
, or
30s
to automatically refresh
the browser at 5, 10, or 30 second intervals.
Date:
The date and time the alarm occurred.
Severity:
The seriousness of the alarm (
Alarm
,
Alert
,
None
).
Description:
Helpful details about the alarm.
Clear fault:
Click
in the alarm row to delete
that alarm
from the table. Click
in the table
header to delete
all alarms
from the table.
4.3.2.2 Alarm Definitions
Use the
Alarm
Definitions
table (Figure 4-19) to view and edit descriptions for each alarm the
system is set to detect. To access this table, point to
Faults
and click
Alarm
Definitions
.
