5 – Testing & Troubleshooting
NetXpress LX & CM-30 Installation & Operation Manual
Version 1, September 2010
Harris Corporation
5-3
Intraplex Products
Figure 5-3. Faults | Current Alarms Table
2.
Click
to clear these alarms from the table.
3.
Point to
Faults
and click
Current
Alarms
(Figure 5-4). As with the
Current Alarms
table, the
Alarm History
table normally displays alarms after initial power-up.
Figure 5-4. Faults | Alarm History Log
4.
Click
to clear these alarms from the log.
5.
Complete the tests in Sections 5.1.3 and 5.1.4.
6.
Keep streams up (Section 5.1.4) for at least 10 minutes.
7.
Check the
Current Alarms
table and
Alarm History
log. There should be no alarms.
