Replacing the bezel
Installing the bezel
Align the bezel in front of the chassis so that the Harmonic logo appears on the top left corner.
1. Keeping the corners aligned, press the bezel straight onto the chassis.
NOTE:
Ensure that the bezel is aligned correctly on the chassis. When the bezel
sits correctly, the front panel LEDs will return to their previous state after about 30
seconds.
2. Hand-tighten the two captive thumb screws to secure the bezel in place.
NOTE:
Do not over-tighten the thumb screws.
Example:
7
MediaDirector Component Replacement Guide
